ANAS 4 Mm kıp lock ( Moroccan brand rifle)

Description

1. Quality tonnage is a product with test report.

4 mm Morocco is the mold lock

The product is 4mm. Red painted material.

Our product is tonnage test report 2,8 It has tone tensile strength.

Product Feature: S235 quality 4 MM IRON HASTER HAVE BASE THICKNESS.

Mandal thickness is 6mm 5045 Steel gear in quality 50-53 HRC is harsh, Steel Sagittarius and Pins.
Use: Mold lock 8 MM Iron Bar As shown in the figure and the sleeve mold lock squeezing machine by applying as much power as necessary squeezed by applying assembly process is done correctly. On the other side of the iron bar, we place the second mold lock and squeeze the mold lock squeezing machine like the other lock.. We do the squeezing process evenly, or some locks do not load equal loads and deformations. Do not forget to cut the iron rod pieces outside the structure. The distance between the mold and the key should be minimum. In addition, the thickness of the latin should be equal.. Otherwise, deformations may be experienced in the lock. The specific weight of the concrete poured into the mold is calculated and enough locks must be used..